Proton Calorimetry/Meetings: Difference between revisions

@@ Line 4: / Line 4: @@
 === [[/2024/09/18|18th September]]===
-== Minutes for UCL Proton Beam Therapy Group Meetings, 4th September ==
-=== Present ===
-'''Joe Bateman''', '''Sonia Escribano''', '''Febian''', '''Simon Jolly''', '''Raffaella Radogna (via zoom) '''
-=== [[ELogs/RaffaellaRadogna|Raffaella Radogna]] ===
-* Pushing for masters student to complete analysis of SciFi monitor (but not with protons from Linear Beam)
-* It is okay for measurement of the beam spot position through the centroid of the cluster
-* Beam size measurements very sensitive to geometric variation between coupling between pixels and fibres - need to find a way to calibrate fibre response
-** Pixel sharing between fibres due to pixel pitch
-* Potential calibration method through shining collimated light onto each of the fibres
-* Noticing reduced intensity on the central pixels
-* Has travel money to use up before end of 2024 - plans to come to UCL.
-** w/b of 28th October to look at SciFi tracker and discuss integrated design
-** Possible second trip in December for beam test if new electronics and scintillator sheets are ready
-=== [[ELogs/Febian|Febian]] ===
-* Upcoming CDT event on 24/10 to present a 2 minute presentation and poster
-=== [[ELogs/JosephBateman|Joseph Bateman]] ===
-=== [[ELogs/SoniaEscribano|Sonia Escribano]] ===
-* Been preparing a talk for the Science Slam session at the DKFZ Medical Physics Summer School
-* Suggestions for QuARC Calibration Issues:
-** Compare the method Saad was using and the new method with the old shoot through files
-** Check with the Manchester and PARTREC data
-* To check up on status of scintillators and follow up with Harry & Martin
-=== [[ELogs/SimonJolly|Simon Jolly]] ===
-* Harry has been in charge of dealing with scintillator sheets but has been occupied by SuperNEMO
-* Have rough cuts from nuvia - either go to Daytron high precision machinery or to someone who has one of these machines. Daytron can do better 10 um flatness
-* Need Martin to machine the flatness
-* Things needed to sort before next beam test:
-** Oxford to do small changes to zmod board
-** Pete Hastings have new ddc boards
-** New scintillators for a full stack -
-** If doing full QuADProBe test only need two stacks
-* Plan for PTCOG Argentina Talk:
-** Full 3D treatment plan MC reconstruction with log file data and QuADProBe measurements at Maastro and at PSI
-** Unsure whether SciFi tracker will be available so will likely have to use Tony's CMOS sensor again if available.
-* Aim for QuARC beam test before end of 2024 - at UCLH
 === [[/2024/09/04|4th September]]===