Proton Calorimetry/Experimental Runs: Difference between revisions

Revision as of 19:37, 29 January 2018

Information is available for the following experimental runs:

Plan of Action for January–March 2018: Plan of action for range calorimeter assembly and experimental tests from January to March 2018.

7th September 2017: Tests of Nuvia scintillator stacks with PRaVDA CMOS pixel sensors (PRIAPUS) at the Birmingham Cyclotron with a 28 MeV beam.
10th August 2017: Tests of Nuvia scintillator stacks with PRaVDA CMOS pixel sensors (PRIAPUS).
1st-3rd March 2017: Measurements at MedAustron with longer scintillator and 252MeV beam.; Give short explanation of the purpose and results.

24th-25th November 2016: Give short explanation of the purpose and results.
2nd-3rd August 2016: Energy-to-range calibration measurements with a calibration wheel used by physicists at Clatterbridge with detector module comprising a 2" PMT and new PS-based scintillator.; Data cross-checking measurements taken with the wheel to that taken with PMMA blocks of equivalent thickness at the same location, and further upstream at the modulator box.; Measured total dose delivered to the new PS-based scintillator for radiation damage and hardness considerations.; Recorded waveform data with new LeCroy HDO6104 oscilloscope.; Made neutron measurements with the large 8" PMT hexagonal block module.

@@ Line 1: / Line 1: @@
 Information is available for the following experimental runs:
+== [[/2018|2018]] ==
+; [[/2018/JanMarPlans|Plan of Action for January&ndash;March 2018]]
+: Plan of action for range calorimeter assembly and experimental tests from January to March 2018.
 == [[/2017|2017]] ==