Software/Geant4/Introduction

Introduction

GEANT4 is a software toolkit based on C++. In your code you have to define:

Your experimental setup: geometry, materials and primary particles.
Which physics process you are interested in.
Take actions during the simulation to inspect and store results.

The interaction with GEANT4 is done via base classes.

Mandatory Classes

G4VUserDetectorConstruction: Describe the experimental setup, geometry and materials.
G4VUserPhysicsList: Define particles, physics processes and range cuts.
G4VUserPrimaryGeneratorAction: Describe particle source, source dimensions, initial position, energy spectrum, angular distributions.

Optional Classes

G4UserRunAction: Define and store histograms.
G4UserEventAction: Event selection and analysis of simulation data.
G4UserStackingAction: Customize priority of tracks.
G4UserTrackingAction: Decide whether a trajectory should be stored or not.
G4UserSteppingAction: Kill, suspend, postpone a track.

Manager Class

G4RunManager: Manages processing the run.

Useful terminology

Step: The smallest unit of Geant4 simulation, a particle is transported from one point to another.
Trajectory and TrajectoryPoint: Collection of steps and step points.
Process: Physics along the step.
Track: A snapshot of a particle at some point along its path (not the same as trajectory).
Event: A collection of information from tracks and trajectories.
Run: A collection of events.

The function `main()`

The function main() defines the skeleton of your simulation code. Inside the function you instantiate G4RunManager and notify it of your mandatory and optional classes. This is an example main() function, where MyDetectorConstruction, MyPhysicsList, MyPrimaryGeneratorAction, MyEventAction and MyRunAction are derived classes from the GEANT4 base classes:

int main() { 
  
// Run manager construction 

G4RunManager* runManager = new G4RunManager; 


// mandatory user initialization classes

runManager->SetUserInitialization(new MyDetectorConstruction); 

runManager->SetUserInitialization(new MyPhysicsList);


// mandatory user action classes  

runManager->SetUserAction(new MyPrimaryGeneratorAction); 


// optional user action classes 

runManager->SetUserAction(new MyEventAction);  

runManager->SetUserAction(new MyRunAction); ... }

Experimental setup

You derive your own class from the G4VUserDetectorConstruction base class. In the derived class you will:

Describe the shape and the size of your detector using G4VSolid;
Construct materials and electromagnetic fields using G4Logical Volume;
Place volumes of your detector geometry using G4VPhysical Volume;

Simple example of class `MyDetectorConstruction`

class MyDetectorConstruction:public G4VUserDetectorConstruction { 

public:  
    
MyDetectorConstruction();

~MyDetectorConstruction(); 
    
virtual G4VPhysicalVolume* Construct(); 

     
private: 
   
void  DefineMaterials(); };

Detector Construction

Now construct the detector. Your detector is always placed in a mother volume called the world volume.

G4PhysicalVolume* MyDetectorConstruction::Construct() {  

...  

// World volume 

G4VSolid* pWorld = new G4Box("World",5*m,5*m,5*m); 
                                         
G4LogicalVolume* pWorldLog = new G4LogicalVolume(pWorld,vacuum, "World");    
                                                                           
G4VPhysicalVolume* pWorldPhys = new G4PVPlacement(0,G4ThreeVector(),pWorldLog,"World",0,false,0);  

// Water box 

G4VSolid* pBoxSolid = new G4Box(“WaterBox”, 1.*m, 2.*m, 3.*m);  

G4LogicalVolume* pBoxLog = new G4LogicalVolume( pBoxSolid, water, “WaterBox”); 

G4VPhysicalVolume* aBoxPhys = new G4PVPlacement( pRotation, G4ThreeVector(posX, posY, posZ), pBoxLog, 

“WaterBox”, pWorldLog, false, copyNo); ... }

Define Elements and Materials

The elements and materials are defined using classes G4Element and G4Material. For example water, hydrogen and oxygen are defined as:

void MyDetectorConstruction::DefineMaterials() { 

... 

G4Element* H = new G4Element("Hydrogen","H",z=1.,a= 1.01*g/mole); 
 
G4Element* O = new G4Element("Oxygen","O",z=8.,a=16.00*g/mole); 


density = 1.000*g/cm3; 

G4Material* water = new G4Material("Water",density,ncomp=2);  

water->AddElement(H, natoms=2);  

water->AddElement(O, natoms=1); ...}

You can find more examples of DetectorConstruction classes on the Geant4 website.

Physics Processes

You can build your own physics list or chose from already built physics lists. To build your own physics lists, you can use two base physics list classes: G4VUserPhysicsList and G4ModularPhysicsList. The class G4VUserPhysicsList is used for simple physics lists while G4ModularPhysicsList is used to build more complex physics lists. There also exist already built pre-packaged physics lists.

Simple physics lists

If the particles in your simulation undergo a discrete number of physics processes you can use the class G4VUserPhysicsList to define them. This class has three methods:

ConstructParticles(): Define all necessary particles.
ConstructProcesses(): Define all necessary processes and assign them to corresponding particles.
SetCuts(): Define production thresholds in terms of range.

Simple example of class `MyPhysicsList`

class MyPhysicsList:public G4VUserPhysicsList() { 

public: 

MyPhysicsList(); 

~MyPhysicsList(); 

void ConstructParticle(); 

void ConstructProcess(); 

void SetCuts(); }

Implement `ConstructParticle()`, `ConstructProcess()` and `SetCuts()` methods

void MyPhysicsList::ConstructParticle() { 

// Define the particles 

G4Electron::ElectronDefinition(); 

G4Positron::PositronDefinition(); 

G4Proton::ProtonDefinition(); 

G4Neutron::NeutronDefinition(); 

G4Gamma::GammaDefinition(); ... }

Relevant physics processes

GEANT4 provides a variety of physics processes. These processes are decoupled from one another and you can select those which are relevant to your simulation. The processes are grouped in seven categories:

Electromagnetic
Hadronic
Decay
Photolepton-hadron
Optical
Parameterization
Transportation

and their list is available on the Geant4 website. For each particle in ConstructParticle() assign all the physics processes you want to consider in your simulation:

void MyPhysicsList::ConstructProcess() { 

AddTransportation(); // Assign transportation process to all particles 

ConstructEM(); // Electromagnetic processes 

ConstructGeneral(); // Other processes }

In methods ConstructEM() and ConstructGeneral() assign the physics processes to the corresponding particles:

void MyPhysicsList::ConstructEM() { 

aParticleIterator->reset(); 

while((*aParticleIterator)()){ 

G4ParticleDefinition* particle = aParticleIterator->value(); 
 
G4ProcessManager* pmanager = particle->GetProcessManager(); 

G4String particleName = particle->GetParticleName(); 
     
if (particleName == "gamma") { 
     
pmanager->AddDiscreteProcess(new G4GammaConversion); ...}

void MyPhysicsList::ConstructGeneral() { 

G4Decay* theDecayProcess = new G4Decay() 

aParticleIterator->reset(); 

while((*aParticleIterator)()) { 

G4ParticleDefinition* particle = aParticleIterator->value(); 
 
G4ProcessManager* pmanager = particle->GetProcessManager(); 

if theDecayProcess->IsApplicable(*particle)) { 
     
pmanager->AddProcess(theDecayProcess); 
     
pmanager->SetProcessOrdering(theDecayProcess,idxPostStep);  
    
pmanager->SetProcessOrdering(theDecayProcess,idxAtRest); }}}

This is the full list of physics processes available for every particle. Finally, in method SetCuts() you can define cuts on the particles:

void MyPhysicsList::SetCuts() {

defaultCutValue = 1.0*mm; 

SetCutValue(defaultCutValue, "gamma"); 

SetCutValue(defaultCutValue, "e+"); 

SetCutValue(defaultCutValue, "e-");

See the Computed Tomography tutorial to learn more about simple physics lists.

Detailed Physics Lists

If you want to build more realistic physics list you have to use the class G4VModularPhysicsList. In G4VModularPhysicsList you can group the physics processes into separate modules which are already pre-build physics list and later chose one of those modules.

Simple example of class `MyPhysicsList`

class MyPhysicsList:public G4VModularPhysicsList { 

public: 

MyPhysicsList(); 

~MyPhysicsList(); 

virtual void ConstructParticle(); 
    
virtual void SetCuts(); 
        
void AddPhysicsList(const G4String& name); 

virtual void ConstructProcess(); 

      
private: 
    
G4String                             fEmName; 

G4VPhysicsConstructor*               fEmPhysicsList; 

G4VPhysicsConstructor*               fDecPhysicsList; 

std::vector<G4VPhysicsConstructor*>  fHadronPhysicsList; };

Now build the physics lists

void MyPhysicsList::AddPhysicsList(const G4String& name) { 

... 

if (name == "emstandard_opt3") { 
    
fEmName = name;   
    
delete fEmPhysicsList; 
    
fEmPhysicsList = new G4EmStandardPhysics_option3(); 


} else if (name == "emlivermore") { 
   
fEmName = name; 
    
delete fEmPhysicsList; 
    
fEmPhysicsList = new G4EmLivermorePhysics(); 


} else if (name == "empenelope") { 
    
fEmName = name; 
    
delete fEmPhysicsList; 
    
fEmPhysicsList = new G4EmPenelopePhysics(); 


} else if (name == "HElastic") { 
    
fHadronPhysicsList.push_back( new G4HadronHElasticPhysics()); 


} else if (name == "HInelastic") { 
   
fHadronPhysicsList.push_back(new G4HadronInelasticQBBC()); 
    
} ... }

and

void MyPhysicsList::ConstructProcess() { 
 
AddTransportation(); // transportation 
  
fEmPhysicsList->ConstructProcess(); // electromagnetic physics list 

fDecPhysicsList->ConstructProcess(); // decay physics list 
  
for(size_t i=0; i<fHadronPhys.size(); i++) { // hadronic physics lists 
  
fHadronPhys[i]->ConstructProcess(); } }

See the Monoenergetic Proton Pencil Beam tutorial to learn more about detailed physics lists.

Pre-Packaged Physics Lists

Some built-in pre-packaged physics lists are available here. You can use them as a starting point of your simulation. Here is a simple example of a pre-packaged physics list. In function main():

G4PhysListFactory factory* physListFactory = new G4PhysListFactory(); 

G4VUserPhysicsList* physicsList = physListFactory->GetReferencePhysList(“FTFP_BERT”); 

runManager->SetUserInitialization(physicsList);

For example, if you want to simulate clinical proton beam of energy 150 MeV you can use a pre-packaged physics list e.g. QGSP_BIC, QGSP_BERT and FTFP_BERT. If you are interested in Bragg curve physics, use a physics list ending in EMV or EMX e.g. QGSP_BERT_EMV.

Generate Primary Particles

You derive your own class from the G4VUserPrimaryGeneratorAction base class. The actual generation of primary particles is done via the classes G4ParticleGun and G4GeneralParticleSource.

G4ParticleGun: Used to simulate a beam of particles. It shoots a primary particle of a certain energy and direction from a given point at a given time.
G4GeneralParticleSource: Simulates a beam of particles and the primary vertex is randomly chosen on the surface of a given volume with pre-defined energy spectra, spatial and angular distribution.

Simple example of class MyPrimaryGeneratorAction using particle gun:

class MyPrimaryGeneratorAction:public G4VUserPrimaryGeneratorAction { 

public: 

MyPrimaryGeneratorAction( 

const G4String& particleName = "proton", 
      
G4double energy = 1.*CLHEP::MeV, 
      
G4ThreeVector position= G4ThreeVector(0,0,0), 
      
G4ThreeVector momentumDirection = G4ThreeVector(0,0,1));     
    
~MyPrimaryGeneratorAction(); 

virtual void GeneratePrimaries(G4Event*); 


private: 
    
G4ParticleGun*  fParticleGun; };

Simple example of class MyPrimaryGeneratorAction using general particle source:

class MyPrimaryGeneratorAction:public G4VUserPrimaryGeneratorAction { 

public: 

MyPrimaryGeneratorAction();     

~MyPrimaryGeneratorAction(); 

virtual void GeneratePrimaries(G4Event*); 


private: 

static const G4String ParticleName; 

static const G4double ParticleEnergy; 

G4GeneralParticleSource*  fGeneralParticleSource; };

Instructions on how to implement the MyPrimaryGeneratorAction class in your code can be found on the Geant4 website.

The Monoenergetic Photon Pencil Beam example uses the G4ParticleGun class. The Proton Beam With Realistic Geometry tutorial uses G4GeneralParticleSource.

Optional User Classes

Run

You can derive your own class from the G4UserRunAction base class where you may book results of the run. The run starts with "Beam On" and within a run you can not change the detector geometry and physics processes. The run is represented by the class G4Run.

You can find examples of user defined RunAction classes on the Geant4 website.

Event

Event is the basic GEANT4 unit. At the beginning of an event are generated primary tracks which are pushed into a stack. The tracks from the stack are analyzed one by one. The primary tracks might lead to secondary tracks which are also pushed into the stack. When the stack becomes empty the processing of the event is over. The event is represented by the G4Event class which gives hits and trajectory collections as output.

You can derive your own class from the G4UserEventAction base class where you can select and analyse data. Examples of user defined EventAction classes can be found on the Geant4 website.

Track

Track is a snapshot of a particle and it is represented by the G4Track class. At the end of the event the track objects do not exist. Tracks are pushed step by step. Moving by one step is called stepping and this can be controlled by the G4UserSteppingAction class (see below). At the end of each step the state of a track can be changed (killed, suspended, postponed).

Step

Step is defined by two points: it also contains information about the particle e.g. energy loss on the step. A step is represented by the G4Step and G4StepPoint classes. G4UserSteppingAction is an optional class where you can kill, suspend, postpone a track.

Status is attached to each G4StepPoint to show how each step was determined. You can use PostStepPoint to get the status of the current step and PreStepPoint to get the status of the previous step. For example to get the "x" coordinate of a step you do the following:

G4StepPoint* prePoint  = step->GetPreStepPoint();

G4double x1 = prePoint->GetPosition().x();

Trajectory

Trajectories are represented by the classes G4Trajectory and G4TrajectoryPoint. The G4Trajectory class copies some of the G4Track class information. G4TrajectoryPoint is the class which copies some of the G4Step information.

Software/Geant4/Introduction

Contents

Introduction

Mandatory Classes

Optional Classes

Manager Class

Useful terminology

The function `main()`

Experimental setup

Simple example of class `MyDetectorConstruction`

Detector Construction

Define Elements and Materials

Physics Processes

Simple physics lists

Simple example of class `MyPhysicsList`

Implement `ConstructParticle()`, `ConstructProcess()` and `SetCuts()` methods

Relevant physics processes

Detailed Physics Lists

Simple example of class `MyPhysicsList`

Now build the physics lists

Pre-Packaged Physics Lists

Generate Primary Particles

Optional User Classes

Run

Event

Track

Step

Trajectory

Navigation menu

Software/Geant4/Introduction

Introduction

Mandatory Classes

Optional Classes

Manager Class

Useful terminology

The function main()

Experimental setup

Simple example of class MyDetectorConstruction

Detector Construction

Define Elements and Materials

Physics Processes

Simple physics lists

Simple example of class MyPhysicsList

Implement ConstructParticle(), ConstructProcess() and SetCuts() methods

Relevant physics processes

Detailed Physics Lists

Simple example of class MyPhysicsList

Now build the physics lists

Pre-Packaged Physics Lists

Generate Primary Particles

Optional User Classes

Run

Event

Track

Step

Trajectory

Navigation menu

Search

The function `main()`

Simple example of class `MyDetectorConstruction`

Simple example of class `MyPhysicsList`

Implement `ConstructParticle()`, `ConstructProcess()` and `SetCuts()` methods

Simple example of class `MyPhysicsList`