Proton Calorimetry/Equipment/Inventory Location

List of tools and equipment stored in D106 updated on Dec 2020.

WOODEN BOOKSHELF

• 2 PELI cases
  • 1 PELI CASE contains HV+Digitiser
  • 1 PELI CASE contains the Thunderbolt Expansion Chassis with Display Port (CMOS sensor graphic card)
• Adam Gibson Nikon camera tools (in the orange plastic bag)
• Mylar Windows for Experimental Runs
• Travel Router
• Features mount for scintillator and PMT
• USB to USB cables
• Ethernet cabler: different length
• Empty Thunderbolt Expansion Chassis with Display Port box (only power cables inside)
• 1 USB to USBC cable
• 1 USB to microUSB cable
• 3 microUSB to USBc cables (different lengths)

STANLEY BIG CASE

- 1 Power strip: USB and Universal sockets - Mains power cables - Wifi router LINKSYS AC1900 - USB to USB long cables - 4 grommet kits - Long SHV cables for HV power supply - Desktop switch - WARCO Vice

PELI Case trolley n.1

- Caen NDT1470 HV Supply - Caen NDT1470 HV Supply power adaptor + mains cable - SHV cables for HV power supply - - Caen DT5751 Digitiser - Caen DT5751 Digitiser power cable - USB Cable to connect the digitiser to the laptop - SMA to SMA short cable

PELI Case trolley n.2

- Neutral filter (fragile) - Thunderbolt Expansion Chassis with Display Port (CMOS sensor graphic card) - Mains power cable + graphic card power supply - USBc to USBc cable to connect the graphic card enclosure to a laptop - Travel network switch - Network switch power cable: USB to barrel power connector - Short ethernet cable

DeWALT Tower

From Bottom to Top

• Bottom Case. Case n. 1
  • Caliper
  • USB to USB cables
  • USB to jack type M Barrel 5V DC power supply (spare cable for the network switch)
  • D-Link Network switch empty box (the switch is in Peli Case 2)

• Case n. 2
  • PMT
  • Silicone Optical grease
  • Scintillator cleaning wipes and liquid cleaner (isopropane?)
  • black tape

• Case n. 3
  • SMA to SMA long and short robust cables
  • BNC to BNC cable
  • BNC to MCX cables for the CAEN digitiser

• Case n. 4
  • Wera Tools: screwdrivers set , blade and L keys

• Case n. 5
  • Scintillators with different sizes. Additional scintillator sheets are on my desk

• Case n. 6
  • BNC, SMA, and SHV patch panel
  • 1 Power strip: USB and Universal sockets
  • Mains power cable
  • Ethernet cables
  • 1 box containing: DC-4200 MHz Signal Splitter, SMA connectors, BNC to SMA connectors and SMA to MCX adaptor. Spanner for SMA connectors.

• Case n. 7
  • ISDI CMOS sensor
  • sensor enclosure screws and washers
  • Camera Link Cable

• Top container. Case n. 8
  • BNC, SMA, and MCX connectors
  • USB sockets for the parch panel
  • Tape Measure
  • Photodiodes and LEDs