Proton Calorimetry/Equipment/Nikon DSLR

Step-by-step guidelines for taking images remotely with a DSLR camera

You need:

• DSLR camera (e.g. Nikon D70 borrowed from Adam Gibson)
• The HEP POOL 12 laptop
• Power cable for the camera
• Mini-USB cable to connect the camera with the laptop

In order to take pictures remotely, do the following:

• Place the camera at least 30cm (distance object-lens) or 40cm (distance object-fixation screw) away from the object you want to photograph (minimum focus)
• Adjust the focus manually by turning the objective wheel counter-clockwise
• Start HEP POOL 12 laptop
• Connect the camera to an external power source (battery is weak)
• Start the Camera (Nikon D70)
• Choose camera mode “M” for manual configuration of settings using the small wheel on the top left of the camera
• Connect the camera to the computer using a Mini-USB cable
• Start the application DIGICAMCONTROL on the laptop. The camera should be recognised by the program
• Select session “Scintillator” on the right hand side of the window
• In “Connected cameras” on the left side, set the image settings:
  • ISO: Sensitivity to light. Select a low value for low noise
  • Shutter speed: light exposure (in seconds). Choose a value close to beam spot duration (e.g. 200ms)
  • Aperture: Opening of the lens. F/10 is a smaller opening than f/5. Every step (f-stop) reduces/increases the opening by a factor of 2 compared to the previous step. The smaller the opening the better the field depth (quality of image far away from focus depth) and the darker the image
  • White Balance: Affects the balance of colours. Select auto setting
  • Exposure compensation: Not needed since we set settings manually. Select 0
  • Compression: Choose both, RAW (NEF) and JPEG
  • Metering Mode: Measures light intensity and optimizes shutter speed and aperture automatically. Not needed since we set settings manually
  • Focus Mode: Choose AF-C, otherwise camera might be unable to focus
• Take a picture by clicking on the lens sign in the top left corner of the window
• If there is a flash, gently press down the flash on the top of the camera, then try again to take a picture.