Proton Calorimetry/Meetings/2022/08/24: Difference between revisions

Revision as of 15:38, 24 August 2022

Saad Shaikh, Simon Jolly, Unik Limbu

Updated calibration routine in data analysis for more robust normalisation. Updated plots in this presentation.
Getting back onto Geant4 simulation: able to produce depth-dose curves and depth-light curves with 0.1mm precision and by-sheet.
- Will take data for 60 MeV, 120 MeV and 250 MeV and test live fit rates.
- Need to fix problems with curve accuracy – will go back into Laurent's simulation.
Matt Warren has made progress with FPGA cod
3D printed mylar window holders for Peli case, will cut mylar sheets for these.
- Will help Derek drill holes into Peli case for rear mylar window.
NUVIA have successfully machined 3.4mm sheets down to 3mm – these will be sent ASAP.
Spoke to Dave and Becky about PhD funding extension – will be ongoing process.

@@ Line 6: / Line 6: @@
 === [[ELogs/SaadShaikh|Saad Shaikh]] ===
-*
+*Updated calibration routine in data analysis for more robust normalisation. Updated plots in [http://www.hep.ucl.ac.uk/pbt/wikiData/presentations/2022/SS220622_UCLH.pptx this presentation].
+*Getting back onto Geant4 simulation: able to produce depth-dose curves and depth-light curves with 0.1mm precision and by-sheet.
+**Will take data for 60 MeV, 120 MeV and 250 MeV and test live fit rates.
+**Need to fix problems with curve accuracy – will go back into Laurent's simulation.
+*Matt Warren has made progress with FPGA cod
+*3D printed mylar window holders for Peli case, will cut mylar sheets for these.
+**Will help Derek drill holes into Peli case for rear mylar window.
+*NUVIA have successfully machined 3.4mm sheets down to 3mm – these will be sent ASAP.
+*Spoke to Dave and Becky about PhD funding extension – will be ongoing process.