Proton Calorimetry/Experimental Runs/2022: Difference between revisions

Revision as of 16:10, 19 August 2022

Manchester FLASH Measurements: FLASH range QA measurements at The Christie.; Also measure WET of stack using PTW PeakFinder.

Clatterbridge Range Measurements: Pristine Bragg peak and SOBP measurements at Clatterbridge using compact QuARC prototype.; Demonstrate detector principle and SOBP fitting.

UCLH 1st September 2022: Experimental measurements at UCLH. Fourth beam test with photodiode DAQ system.; Measurements of the WET of stack of white painted sheets and clear sheets (with Mylar) from previous UCLH beam test using IBA Giraffe.; Scintillator light quenching using single scintillator block and camera.

UCLH 16th June 2022: Experimental measurements at UCLH. Third beam test with photodiode DAQ system.; Test light output with Rev. B prototype containing white sheets and clear sheets, comparing with CMOS sensor. Test new Rev.C prototype.; Also contains details on follow-up crosstalk measurements of the two prototypes.

LED Optical Isolation Tests: Lab tests at UCL using LED fibre injection and unpainted sheets with layers of material in between to provide optical isolation.; Test cross-talk and light levels with no material, white paper, black card and mylar foil

@@ Line 11: / Line 11: @@
 : Measurements of the WET of stack of white painted sheets and clear sheets (with Mylar) from previous UCLH beam test using IBA Giraffe.
 : Scintillator light quenching using single scintillator block and camera.
-; [[/UCLHWET|UCLH WET Measurements]]
-: Measurements of the WET of stack of white painted sheets and clear sheets (with Mylar) from previous UCLH beam test.
-: Use IBA Giraffe to measure WET during UCLH monthly QA session.
 ; [[/Jun16|UCLH 16th June 2022]]