Proton Calorimetry/Meetings/2020/12/02: Difference between revisions
SaadShaikh (talk | contribs) (Created page with "== Minutes for UCL Proton Calorimetry Meetings, 25th November == === Present === '''Simon Jolly''', '''Raffaella Radogna''', '''Saad Shaikh''', '''Fern Pannell''' === [[ELogs/...") |
SaadShaikh (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
== Minutes for UCL Proton Calorimetry Meetings, | == Minutes for UCL Proton Calorimetry Meetings, 2nd December == | ||
=== Present === | === Present === | ||
| Line 8: | Line 8: | ||
=== [[ELogs/SaadShaikh|Saad Shaikh]] === | === [[ELogs/SaadShaikh|Saad Shaikh]] === | ||
*Took further measurements at UCL with Raffy using DDC232 board. Office measurements still noisy, so need to figure out how to shield electronics. | |||
*Will take light measurements at home using UV torch. | **Will take light measurements at home using UV torch. | ||
*Created live version of Laurent's ROOT quenched Bragg fit – tested with data from HIT April 2019 converted into hexadecimal format to simulate photodiode data. | |||
**Can achieve roughly 3.5 FPS if binned fit is not chosen. | |||
**Will see if macro can be optimised further. | |||
*Will compare readout speeds of DDC232, DDC316 and DDC118 for full size detector. Will assume 1:1 photodiode to input mapping. | |||
*USB interface will require using libftdi on Windows, in order to use ILA for debugging while capturing data. Currently unsure if this is possible. | |||
*Laptop has been purchased using Raffy's hardware grant. Simon still happy for me to keep it. :) | |||
**Remaining £1k from HEP could be put towards a laptop later down the line. | |||
=== [[ELogs/FernPannell|Fern Pannell]] === | === [[ELogs/FernPannell|Fern Pannell]] === | ||
Revision as of 17:44, 2 December 2020
Minutes for UCL Proton Calorimetry Meetings, 2nd December
Present
Simon Jolly, Raffaella Radogna, Saad Shaikh, Fern Pannell
Raffaella Radogna
Saad Shaikh
- Took further measurements at UCL with Raffy using DDC232 board. Office measurements still noisy, so need to figure out how to shield electronics.
- Will take light measurements at home using UV torch.
- Created live version of Laurent's ROOT quenched Bragg fit – tested with data from HIT April 2019 converted into hexadecimal format to simulate photodiode data.
- Can achieve roughly 3.5 FPS if binned fit is not chosen.
- Will see if macro can be optimised further.
- Will compare readout speeds of DDC232, DDC316 and DDC118 for full size detector. Will assume 1:1 photodiode to input mapping.
- USB interface will require using libftdi on Windows, in order to use ILA for debugging while capturing data. Currently unsure if this is possible.
- Laptop has been purchased using Raffy's hardware grant. Simon still happy for me to keep it. :)
- Remaining £1k from HEP could be put towards a laptop later down the line.