Proton Calorimetry/Meetings/2020/06/09: Difference between revisions

Revision as of 19:26, 9 June 2020

Simon Jolly,Laurent Kelleter, Saad Shaikh, Raffaella Radogna

installed Windows 10 Enterprise using Bootcamp and creating a partition
is writing a draft for a fellowship proposal to be discussed with the BEAMS team at UCL
started reading Laurent's remaining chapters
will install Vivado on the Windows partition and start learning FPGA programming

Presented on I/O signals and operation of TI DDC232CK based on datasheet information. Slides available here
Will work on creating serial UART interface project.
Need to find out how to create a 10MHz clock from a 125MHz clock.
Obtained PSUs, adaptor and cabling for front-end board/FPGA/PC set up. CosyLab have shipped front-end board.
Heard back from Electrical Engineering about accessing ELEC0028:
- Provided textbook 'Digital Design and Computer Architecture' for background reading.
- Pending confirmation of access to Moodle page.
Will be striking on 10/06/20 for Black Lives Matter.

@@ Line 12: / Line 12: @@
 === [[ELogs/SaadShaikh|Saad Shaikh]] ===
+*Presented on I/O signals and operation of TI DDC232CK based on datasheet information. Slides available [http://www.hep.ucl.ac.uk/pbt/wikiData/presentations/2020/SS090620_DDC232.pptx here]
+*Will work on creating serial UART interface project.
+*Need to find out how to create a 10MHz clock from a 125MHz clock.
+*Obtained PSUs, adaptor and cabling for front-end board/FPGA/PC set up. CosyLab have shipped front-end board.
+*Heard back from Electrical Engineering about accessing ELEC0028:
+**Provided textbook 'Digital Design and Computer Architecture' for background reading.
+**Pending confirmation of access to Moodle page.
+*Will be striking on 10/06/20 for Black Lives Matter.
 === [[ELogs/LaurentKelleter|Laurent Kelleter]] ===