Proton Calorimetry/Experimental Runs/2017/Aug10-31: Difference between revisions

From PBTWiki
Jump to navigation Jump to search
Line 7: Line 7:
*Multiplexer
*Multiplexer
*Computer with aSpect software
*Computer with aSpect software
Then follow these steps:
*Launch computer. Password: aSpect
*Window will open automatically. In "Drive U Substitution" select first entry. Then press "substitute".
*Open "IDMate":
**In "DUT Grap" (find it in upper left corner) select "Init Testsystem" and press "play" button.
**TCP will show error message.
**Set settings:
***n21: Stream_master: value=1
***n32: CB111_En: value=1
***n46: BeamClk_En: value=0
**Confirm by pressing "Set all"
**Select "DUT init CT mode" and press play button.
**To record frames, select "Streaming Start" and press play. It will ask you to select a file name. After confirmation, frames are recorded.
**More important settings:
***n24: Set saving path for file.
***n26: Stream_repeats: set number of frames. "0" equals one frame, "1" equals two frames, etc.
***n28:Stream_daqtime: integration time of sensor in seconds. Must be an integer between 1 and 6.
**To exit IDMate, select "DUT Exit" and press play button.
*Files are stored in a binary format. In order to have a quick look at the output, use "Pravda file viewer".
**Select file in upper bar. Then press "Read file".
**Select "Image" button to see visualisation of the binary data.
**There is the possibility to export the data as .txt file or .tif image.


== 10th August ==
== 10th August ==

Revision as of 15:45, 22 August 2017

Experimental tests with Nuvia 3mm scintillator sheets and Pravda CMOS stacked sensor.

Set-up of MAPS

This section contains the instructions to take images with the MAPS sensor developed for the PRaVDA collaboration. In order to use the MAPS sensor, three components are essential:

  • MAPS sensor integrated in board
  • Multiplexer
  • Computer with aSpect software

Then follow these steps:

  • Launch computer. Password: aSpect
  • Window will open automatically. In "Drive U Substitution" select first entry. Then press "substitute".
  • Open "IDMate":
    • In "DUT Grap" (find it in upper left corner) select "Init Testsystem" and press "play" button.
    • TCP will show error message.
    • Set settings:
      • n21: Stream_master: value=1
      • n32: CB111_En: value=1
      • n46: BeamClk_En: value=0
    • Confirm by pressing "Set all"
    • Select "DUT init CT mode" and press play button.
    • To record frames, select "Streaming Start" and press play. It will ask you to select a file name. After confirmation, frames are recorded.
    • More important settings:
      • n24: Set saving path for file.
      • n26: Stream_repeats: set number of frames. "0" equals one frame, "1" equals two frames, etc.
      • n28:Stream_daqtime: integration time of sensor in seconds. Must be an integer between 1 and 6.
    • To exit IDMate, select "DUT Exit" and press play button.
  • Files are stored in a binary format. In order to have a quick look at the output, use "Pravda file viewer".
    • Select file in upper bar. Then press "Read file".
    • Select "Image" button to see visualisation of the binary data.
    • There is the possibility to export the data as .txt file or .tif image.

10th August

14th August