Proton Calorimetry/Meetings/2021/10/06: Difference between revisions

Latest revision as of 11:37, 7 October 2021

Simon Jolly, Saad Shaikh

Registered for IEEE NIS MCC 2021.
- Recorded video presentation and edited poster/slides. Will edit video once Raffy films.
Implemented simple live fit gate:
- Using ratio between average photodiode value and peak value. With noisy data between 70-110 MeV, 1.8 seems to be a good cut.
Spoke with Lorzeno Moneta about multi-threading, does not seem that ROOT-based multi-threading improves speed.
Spoke with Ruben and Anastasia about optical gel: standard "550" should work.
- Applied expired gel to a photodiode as a test. Simon to order more.
Spoke with Connor about stack design:
- Simon proposed improvements on current working idea, using large area plates to apply force and shallow front cap with corner edges.
- Connor to mock-up design and get back in touch.
Partially tested experimental setup:
- FPGA/photodiode cabling done, need to test networking, DAQ laptop and Pi.
- Tape removed from scintillator sheets, edges require cleaning with isopropyl.
Will setup and test headless Pi.

@@ Line 3: / Line 3: @@
 === Present ===
-'''Simon Jolly''', '''Saad Shaikh''', '''Jeremy Ocampo'''
+'''Simon Jolly''', '''Saad Shaikh'''
 === [[ELogs/SaadShaikh|Saad Shaikh]] ===
-*
+*Registered for IEEE NIS MCC 2021.
+**Recorded video presentation and edited poster/slides. Will edit video once Raffy films.
+*Implemented simple live fit gate:
+**Using ratio between average photodiode value and peak value. With noisy data between 70-110 MeV, 1.8 seems to be a good cut.
+*Spoke with Lorzeno Moneta about multi-threading, does not seem that ROOT-based multi-threading improves speed.
+*Spoke with Ruben and Anastasia about optical gel: standard "550" should work.
+**Applied expired gel to a photodiode as a test. Simon to order more.
+*Spoke with Connor about stack design:
+**Simon proposed improvements on current working idea, using large area plates to apply force and shallow front cap with corner edges.
+**Connor to mock-up design and get back in touch.
+*Partially tested experimental setup:
+**FPGA/photodiode cabling done, need to test networking, DAQ laptop and Pi.
+**Tape removed from scintillator sheets, edges require cleaning with isopropyl.
+*Will setup and test headless Pi.