Proton Calorimetry/Experimental Runs/2016: Difference between revisions

Revision as of 13:50, 8 March 2017

The following experimental runs were made in 2016:

To obtain energy-to-range calibration measurements with a calibration wheel used by physicists at Clatterbridge with detector module comprising a 2" PMT and new PS-based scintillator.
To obtain data cross-checking measurements taken with the wheel to that taken with PMMA blocks of equivalent thickness at the same location, and further upstream at the modulator box.
To record total dose delivered to the new PS-based scintillator for radiation damage and hardness considerations.
To record waveform data with new LeCroy HDO6104 oscilloscope.
To record neutron measurements with the large 8" PMT hexagonal block module.

@@ Line 3: / Line 3: @@
 == [[/Aug2-3|2nd+3rd August 2016]] ==
-Give longer explanation of test setup and results, but leave details to individual page.
+* To obtain energy-to-range calibration measurements with a calibration wheel used by physicists at Clatterbridge with detector module comprising a 2" PMT and new PS-based scintillator.
+* To obtain data cross-checking measurements taken with the wheel to that taken with PMMA blocks of equivalent thickness at the same location, and further upstream at the modulator box.
+* To record total dose delivered to the new PS-based scintillator for radiation damage and hardness considerations.
+* To record waveform data with new LeCroy HDO6104 oscilloscope.
+* To record neutron measurements with the large 8" PMT hexagonal block module.