Proton Calorimetry/Experimental Runs/2018/Feb21: Difference between revisions
| Line 49: | Line 49: | ||
| style="text-align: center;" | USB Cable | | style="text-align: center;" | USB Cable | ||
| style="text-align: center;" | Caen HV unit to DAQ Laptop | | style="text-align: center;" | Caen HV unit to DAQ Laptop | ||
|- | |||
| style="text-align: center;" | Gloves | |||
| style="text-align: center;" | For handling scintillator | |||
|- | |||
| style="text-align: center;" | Optical gel | |||
| style="text-align: center;" | For coupling scintillator to PMT | |||
|- | |||
| style="text-align: center;" | Wipes | |||
| style="text-align: center;" | For removing optical gel | |||
|} | |} | ||
Revision as of 17:40, 19 February 2018
Beam tests of the single module with PRaVDA CMOS pixel sensors (PRIAPUS) at the Birmingham Cyclotron with a 36 MeV beam.
Equipment List
| Item | Notes |
|---|---|
| Single Module Scintillator Block | Optical gel required to couple Scintillator to PMT |
| Photomultiplier Tube | (Hamamatsu 2"?) |
| Portable Enclosure | Modified Peli 1510 Waterproof Wheeled Equipment Case. 230 x 555 x 350mm |
| LeCroy HDO6104 Oscilloscope | Records PMT output |
| DAQ Laptop | Records HV output / Controls Caen HV supply |
| Caen NDT1470 HV Supply | Supplies HV to PMT |
| Control Laptop x 2 | One each for Remote Desktop control of LeCroy Oscilloscope and DAQ Laptop. |
| Network Hub x 2 | One for the experimental room for the LeCroy HDO6104 and DAQ Laptop to connect to,
one for the control room for each of the Control Laptops to connect to. |
| Ethernet Cable x 4 | To connect each control laptop, the LeCroy HDO6104 and DAQ Laptop to their respective network hubs. |
| Ethernet Cable | To connect the two Network Hubs and complete the network for controlling DAQ equipment from the control room. |
| SMA (female) to BNC (male) Cable | Signal from enclosure port to LeCroy Oscilloscope |
| SHV Cable | HV supply from experimental room to enclosure port |
| USB Cable | Caen HV unit to DAQ Laptop |
| Gloves | For handling scintillator |
| Optical gel | For coupling scintillator to PMT |
| Wipes | For removing optical gel |