Proton Calorimetry/Meetings/2020/06/09: Difference between revisions

From PBTWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by one other user not shown)
Line 3: Line 3:
=== Present ===
=== Present ===


'''Simon Jolly''','''Laurent Kelleter''', '''Saad Shaikh''', '''Raffaella Radogna'''
'''Simon Jolly''', '''Saad Shaikh''', '''Raffaella Radogna'''


=== [[ELogs/RaffaellaRadogna|Raffaella Radogna]] ===
=== [[ELogs/RaffaellaRadogna|Raffaella Radogna]] ===
Line 12: Line 12:


=== [[ELogs/SaadShaikh|Saad Shaikh]] ===
=== [[ELogs/SaadShaikh|Saad Shaikh]] ===
 
*Presented on I/O signals and operation of TI DDC232CK based on datasheet information. Slides available [http://www.hep.ucl.ac.uk/pbt/wikiData/presentations/2020/SS090620_DDC232.pptx here]  
=== [[ELogs/LaurentKelleter|Laurent Kelleter]] ===
*Will work on creating serial UART interface project.
*Need to find out how to create a 10MHz clock from a 125MHz clock.
*Obtained PSUs, adaptor and cabling for front-end board/FPGA/PC set up. CosyLab have shipped front-end board.
*Heard back from Electrical Engineering about accessing ELEC0028:
**Provided textbook 'Digital Design and Computer Architecture' for background reading.
**Pending confirmation of access to Moodle page.
*Will be striking on 10/06/20 for Black Lives Matter.

Latest revision as of 08:13, 17 June 2020

Minutes for UCL Proton Calorimetry Meetings, 9th June (Everyone is working from home)

Present

Simon Jolly, Saad Shaikh, Raffaella Radogna

Raffaella Radogna

  • installed Windows 10 Enterprise using Bootcamp and creating a partition
  • is writing a draft for a fellowship proposal to be discussed with the BEAMS team at UCL
  • started reading Laurent's remaining chapters
  • will install Vivado on the Windows partition and start learning FPGA programming

Saad Shaikh

  • Presented on I/O signals and operation of TI DDC232CK based on datasheet information. Slides available here
  • Will work on creating serial UART interface project.
  • Need to find out how to create a 10MHz clock from a 125MHz clock.
  • Obtained PSUs, adaptor and cabling for front-end board/FPGA/PC set up. CosyLab have shipped front-end board.
  • Heard back from Electrical Engineering about accessing ELEC0028:
    • Provided textbook 'Digital Design and Computer Architecture' for background reading.
    • Pending confirmation of access to Moodle page.
  • Will be striking on 10/06/20 for Black Lives Matter.