|
|
| (16 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
| AWAKE Simulations | | AWAKE Simulations |
|
| |
|
| == Poster Simulation 09-09-22 ==
| | Run summaries of Particle-in-Cell Simulations for PDPWA. |
|
| |
|
| Simulation of short driver bunches. Beams are defined directly within the configuration and beamfiles run through lem.py for diagnostics.
| |
|
| |
|
| | == LCODE == |
|
| |
|
| | === [[/STFC Summer School 2022 Poster|September 2022: STFC Summer School 2022 Poster]] === |
|
| |
|
| {| class="wikitable"
| | === [[/DriverStudy|Electron-Positron Driver Comparison]] === |
| !Run Number
| | |
| !Base Configuration
| | == WarpX == |
| !Window Width
| |
| !Window Length
| |
| ! q/m
| |
| !Total Weight (pC)
| |
| !LCODE ampl
| |
| !LCODE Beam Current
| |
| !LCODE Beam Length
| |
| !Beam Length (um)
| |
| !Energy (approx) (GeV)
| |
| !Comments
| |
| |- | |
| |1 || short_bunch - DAC || 3 || 10 || 1.0 || -2045.504558 || 1 || -3.6 || 0.1 || 3.63 || 30 || Default DAC short_bunch.cfg
| |
| |-
| |
| |2 || short_bunch - DAC || 3 || 10 || 0.00054 || -2045.504558 || 1 || -3.6 || 0.1 || 3.64 || 30 || Only change made to cfg m/q for protons. Ez plots for 1 and 2 are identical.
| |
| |-
| |
| |3 || short_bunch - DAC || 3 || 20 || 1.0 || -2045.504558 || 1 || -3.6 || 0.1 || 3.64 || 30 || Plot x-range increases with window length increase.
| |
| |-
| |
| |4 || short_bunch - DAC || 3 || 100 || 1.0 || -2045.504558 || 1 || -3.6 || 0.1 || 3.63 || 30 || Expecting Ez fall off with distance. Do observe this.
| |
| |-
| |
| |5 || short_bunch - DAC || 3 || 100 || 0.00054 || -2045.504558 || 1 || -3.6|| 0.1 || 3.64 || 30 || Checking to see if Ez attenuation with distance is different for q/m=1/1836 (proton ). Identical plots.
| |
| |-
| |
| |6 || short_bunch - DAC || 3 || 20 || 0.00054 || -2045.504558 || -1 || -3.6 || 0.1 || 3.64 || 30 || Can compare this with run 3 as mass not impacting currently. Identical despite ampl=-1 meaning should be opposite charge. Will set this directly in m/q next.
| |
| |-
| |
| |7 || short_bunch - DAC || 3 || 20 || 1.0 || -2045.504558 || 1 || -3.6 || 0.1 || 3.63 ||30 || Despite setting m/q=1 in cfg, lem still shows positive and so results identical to run 3.
| |
| |-
| |
| |8 || short_bunch - DAC || 3 || 20 || 1.0 || -2045.504558 || -1 || -3.6 || 0.1 || 3.63 ||30 || Keeping m/q as negative and making ampl=-1. Still no change. It seems (from previous knowledge) only changing the sign of the beam current in cfg makes a difference to m/q sign.
| |
| |-
| |
| |9 || short_bunch - DAC || 3 || 20 || 1.0 || 2045.504558 || -1 || +3.6 || 0.1 || 3.63 ||30 || Return to run 3 parameters but set current to positive. Saying q/m is +1 still, but total weight is now positive, suggesting previous runs have been negative species and this is positive.
| |
| |-
| |