Proton Calorimetry/Experimental Runs/2022/Sep1: Difference between revisions

Latest revision as of 17:20, 8 September 2022

Experiment Equipment

Item	Notes
Network Hub	Set in control room to take output from experimental room ethernet connection. Control laptops connected via 5GHz WiFi.
Control Laptop x31	1 for remote control of Nikon camera and FPGA, 1 for notes/web GUI.
Ethernet Cable x 2	To connect DAQ laptop to network in the experimental room, control laptop to network in control room.
Portable Enclosures	Modified Big Zarges Waterproof Wheeled Equipment Case. Features mount for scintillator stack, front and back openings for beam, patch panel with ports for SHV, BNC, SMA, USB, Camera Link cables. Hole for sensor powering. Modified Small Peli Case Waterproof Wheeled Equipment Case. Features mount for scintillator stack, front and back openings for beam, patch panel with ports for USB and power connections. Mylar windows with Al support mounted to internal face: approximately light-tight.
Clear Scintillator stack for WET measurement.	25 clear X x 100 mm, Y x 100 mm and Z x (approx) 2.8 mm sheets. Containing sheets (not in order): 79, 68, 73, 62, 81, 72, 64, 67, 65, 71, 78, 77, 74, 75, 85, 82, 83, 76, 70, 80, 69, 84, 63, 66, 61. Full stack thickness measurements (in mm): 71.00, 71.00, 71.01 = 71.00.
White Painted Scintillator stack for WET measurement.	23 white painted X x 100 mm, Y x 100 mm and Z x (approx) 2.8 mm sheets. Containing sheets (not in order): 34, 43, 32, 8, 40, 37, 38, 47, 46, 33, 42, 9, 39, 44, 49, 50, 31, 1, 45, 3, 54, 5, 51. Full stack thickness measurements (in mm): 65.51, 65.53, 65.45 = 65.50.
Clatterbridge Prototype A	14 clear X x 100 mm, Y x 100 mm and Z x (approx) 2.8 mm sheets. Containing sheets (ascending photodiode order, board upside down): 81, 83, 65, 74, 69, 78, 61, 77, 63, 71, 70, 73, 64, 85. Full stack thickness measurements (in mm): 39.89.
Clatterbridge Prototype B	11 clear and 3 white X x 100 mm, Y x 100 mm and Z x (approx) 2.8 mm sheets. Containing sheets (ascending photodiode order, board upside down): 52, 79, 68, 66, 75, 82, 84, 62, 80, 72, 67, 76, 51, 54. Full stack thickness measurements (in mm): 39.92.
Rev. D Scintillator stack	32 X x 105 mm, Y x 105 mm and Z x (approx) 3 mm sheets. Containing sheets (ascending photodiode order, board upside down): 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168. Full stack thickness measurements (in mm): 95.84, 95.72, 95.78 = 95.78.
Large Single Scintillator Block	X x 100 mm, Y x 100 mm and Z x 178.57 mm.
DAQ laptop x1	Control Nikon camera and photodiode acquisition.
Nikon D7500	Connected to DAQ Laptop via USB cable.
Nexys Video FPGA development board.	For interfacing between DDC232 and PC.
Rev. B Texas Instruments DDC232 custom circuit board (x2)	Each housing 16x Hamamatsu S12915-16R photodiodes, coupled directly to scintillator sheets. Aligned by eye to scintillator sheets.
Rev. D Texas Instruments DDC232 custom circuit board (x1)	Housing 32x Hamamatsu S12915-16R photodiodes, coupled directly to scintillator sheets. Aligned by eye to scintillator sheets.
Gloves	For handling scintillator

Schematic

Experiment Plan

Estimated first beam: 16.00.

Set up mains cabling and networking in treatment and control rooms.
Install Peli case and Giraffe on treatment couch:
1. Set up 2 x 2.86mm stacks for shoot through measurement of range pullback at ~245MeV (no DAQ needed).
2. Align Peli case and Giraffe using in-room lasers.
3. Measure range pullback of combined stack, each individual stack and empty case.
Set up Peli case for range pullback measurement of single block:
1. Remove long rail from Peli case and install single scintillator block.
2. Simultaneously dismantle 2 x 2.86mm stacks and assemble Clatterbridge stacks with rev.B DDC board.
3. Check alignment of Peli case and Giraffe.
4. Measure range pullback of single block.
Set up Peli case for range pullback measurement of 32 x 3mm stack:
1. Remove single scintillator block.
2. Install 32 x 3mm stack with rotated rail; reinstall long rail.
3. Simultaneously install single scintillator block in Zarges case with camera.
4. Check alignment of Peli case and Giraffe.
5. Measure range pullback of 32 x 3mm stack.
Set up Peli case for range pullback measurement of Clatterbridge stacks:
1. Remove 32 x 3mm stack; install Clatterbridge stacks on long rail and clamp in place.
2. Check alignment of Peli case and Giraffe.
3. Measure range pullback of Clatterbridge stacks together and individually.
Set up Zarges case for single block quenching measurements:
1. Remove Peli case and Giraffe from treatment couch.
2. Install Zarges case on treatment couch and align with room lasers.
3. Connect DAQ and check camera functionality.
4. Simultaneously set up Peli case with Clatterbridge stacks and FPGAs ready for shoot throughs.
5. Measure light output from shoot through and set exposure time.
6. Record photos of single block light output for energies from 70 MeV to ~150MeV (maximum energy with beam still in block).
Set up Peli case for Clatterbridge DAQ measurements:
1. Remove Zarges case from treatment couch; install Peli case with FPGA, cabling and Clatterbridge stacks.
2. Check alignment of Peli case and DAQ hardware.
3. Record DDC calibration data for shoot through and background.
Set up Peli case for 32 x 3mm stack measurements:
1. Remove Clatterbridge stacks and store safely.
2. Install 32 x 3mm stack in Peli case with rev.C/D DDC board.
3. Check alignment of Peli case and DAQ hardware.
4. Measure background and shoot through of 32 x 3mm stack.
5. Measure proton energies in range 70–110 MeV.
Dismantle equipment, pack up and fuck off.

Experiment Notes

Range calorimeter measurements with photodiodes, camera and IBA Giraffe.

Images from Camera: /unix/www/html/pbt/wikiData/images/UCLH_Sep2022/Nikon

Photodiode hexadecimal data: /unix/pbt/data/uclh/20220901/DDC232

Giraffe data: /unix/pbt/data/uclh/20220901/Giraffe

IBA Giraffe Range Pull Back Measurements

Run number	Detector config	Beam Energy (MeV)	Beam Current (nA)	Physical thickness (mm)	D80 measured (mm)	Comments
0	Clear stack + white stack	210	40	N/A	139.1	Nominal: 282.1 mm
1	Clear stack	210	40	N/A	206.6	Nominal: 282.1 mm
2	White stack	210	40	N/A	212.3	Nominal: 282.1 mm
3	Empty Case	210	40	N/A	280.0	Nominal: 282.1 mm
4	Single block	210	40	N/A	94.2	Curve looks really bad!!
5	REVD	210	40	N/A	182.0
6	Clatterb. A	210	N/A	N/A	238.4
7	Air - no box	210	N/A	N/A	280.0	Here we see that the windows have no effect as this results is equal to run 3
8	Clatterb. B	210	40	N/A	238.9

Camera Light Quenching Measurements

NOTE: alignment plates left on Zarges case during measurement

Run number	Image number	Beam Energy (MeV)	Estimated Range (mm)	Current (nA)	Exposure (s)	Aperture	ISO	Image	Fit
0	IMG0047	Background			5	f/5.6	ISO100	[PIC]	Background, exposure 5s
1	IMG0048	245 MeV	366.3	10	1	f/5.6	ISO100	[PIC2]	exposure 1s
2	IMG0049	245	366.3	10	0.5	f/5.6	ISO100	[PIC2]
3	IMG0050	245		10	0.25	f/5.6	ISO100	[PIC2]
4	IMG0051	245		10	0.1	f/5.6	ISO100	[PIC2]
5	IMG0052	70 MeV		700	0.5	f/5.6	ISO100	[PIC2]
6	IMG0053	70			0.25	f/5.6	ISO100	[PIC2]
7	IMG0054	70			0.1	f/5.6	ISO100	[PIC2]
8	IMG0055	70			0.05	f/5.6	ISO100	[PIC2]
9	IMG0056	75 MeV		700 nA	0.5	f/5.6	ISO100	[PIC2]
10	IMG0057	75			0.25	f/5.6	ISO100	[PIC2]
11	IMG0058	75			0.1	f/5.6	ISO100	[PIC2]
12	IMG0059	75			0.05	f/5.6	ISO100	[PIC2]
13	IMG0060	80 MeV		500 nA	0.5	f/5.6	ISO100	[PIC2]
14	IMG0061	80		500 nA	0.25	f/5.6	ISO100	[PIC2]
15	IMG0062	80		500 nA	0.1	f/5.6	ISO100	[PIC2]
16	IMG0063	80		500 nA	0.05	f/5.6	ISO100	[PIC2]
17	IMG0064	130 MeV		200 nA	0.5	f/5.6	ISO100	[PIC2]
18	IMG0065	130		200 nA	0.25	f/5.6	ISO100	[PIC2]
19	IMG0066	130		200 nA	0.1	f/5.6	ISO100	[PIC2]
20	IMG0067	130		200 nA	0.05	f/5.6	ISO100	[PIC2]
21	IMG0068	140 MeV		165 nA	0.5	f/5.6	ISO100	[PIC2]
22	IMG0069	140		nA	0.25	f/5.6	ISO100	[PIC2]
23	IMG0070	140		nA	0.1	f/5.6	ISO100	[PIC2]
24	IMG0071	140		nA	0.05	f/5.6	ISO100	[PIC2]
25	IMG0072	150 MeV		125 nA	0.5	f/5.6	ISO100	[PIC2]
26	IMG0073	150		nA	0.25	f/5.6	ISO100	[PIC2]
27	IMG0074	150		nA	0.1	f/5.6	ISO100	[PIC2]
28	IMG0075	150		nA	0.05	f/5.6	ISO100	[PIC2]
29	IMG0076	160 MeV		125 nA	0.5	f/5.6	ISO100	[PIC2]
30	IMG0077	160		nA	0.25	f/5.6	ISO100	[PIC2]
31	IMG0078	160		nA	0.1	f/5.6	ISO100	[PIC2]
32	IMG0079	160		nA	0.05	f/5.6	ISO100	[PIC2]
33	IMG0080	170 MeV		130 nA	0.5	f/5.6	ISO100	[PIC2]
34	IMG0081	170		nA	0.25	f/5.6	ISO100	[PIC2]
35	IMG0082	170		nA	0.1	f/5.6	ISO100	[PIC2]
36	IMG0083	170		nA	0.05	f/5.6	ISO100	[PIC2]
37	IMG0084	120 MeV		270 nA	0.5	f/5.6	ISO100	[PIC2]
38	IMG0085	120		nA	0.25	f/5.6	ISO100	[PIC2]
39	IMG0086	120		nA	0.1	f/5.6	ISO100	[PIC2]
40	IMG0087	120		nA	0.05	f/5.6	ISO100	[PIC2]
41	IMG0088	110 MeV		300 nA	0.5	f/5.6	ISO100	[PIC2]
42	IMG0089	110		nA	0.25	f/5.6	ISO100	[PIC2]
43	IMG0090	110		nA	0.1	f/5.6	ISO100	[PIC2]
44	IMG0091	110		nA	0.05	f/5.6	ISO100	[PIC2]
45	IMG0092	100 MeV		350 nA	0.5	f/5.6	ISO100	[PIC2]
46	IMG0093	100		nA	0.25	f/5.6	ISO100	[PIC2]
47	IMG0094	100		nA	0.1	f/5.6	ISO100	[PIC2]
48	IMG0095	100		nA	0.05	f/5.6	ISO100	[PIC2]
49	IMG0096	90 MeV		400 nA	0.5	f/5.6	ISO100	[PIC2]
50	IMG0097	90		nA	0.25	f/5.6	ISO100	[PIC2]
51	IMG0098	90		nA	0.1	f/5.6	ISO100	[PIC2]
52	IMG0099	90		nA	0.05	f/5.6	ISO100	[PIC2]

DDC232 Calibration and Bragg Peak Measurements

Run number	Detector	Beam Energy (MeV)	Estimated Range (mm)	Current (nA)	Spot size (mm, FWHM)	DDC232 FSR (pC)	DDC232 Integration Time (us)	Degrader WET (mm)	Comments	Photodiode QB Fit	Replay Fit
0	Clatter. A	Background		-	N/A	12.5 (constant)	170			N/A
1	Clatter. A	245 MeV		10 nA	N/A	12.5	170		Gantry angle 270, shoot through	N/A
2	Clatter. B	Background	N/A	N/A	N/A	12.5	170			N/A	N/A
3	Clatter. B	245 MeV	10 nA	N/A	12.5	170			Gantry angle 270, shoot through	N/A
4	Clatter. B	245 MeV	10 nA	N/A	N/A	12.5	170		Gantry angle 90, shoot through	N/A. After this Clatter. B was destroyed
5	Clatter. A	245 MeV	10 nA	N/A	N/A	12.5	170		Gantry angle 90, shoot through	N/A
6	Clatter. A	70 MeV	700 nA	N/A	N/A	12.5	170	0	Gantry angle 90	N/A	N/A
7	REVD prototype	Background	N/A	N/A	N/A	12.5	170	0	-	N/A	N/A
8	REVD prototype	245 MeV	10 nA	N/A	N/A	12.5	170	0	Gantry angle 90, shoot through. Clatterbridge A upstream and Clatt. B downstream	N/A	N/A
9	REVD prototype	130 MeV	200 nA	N/A	N/A	12.5	170	0	Gantry angle 90. Clatterbridge A upstream and Clatt. B downstream	N/A	N/A
10	REVD prototype	245 MeV	10 nA	N/A	N/A	12.5	170	0	Gantry angle 270, shoot through. Clatterbridge A downstream and Clatt. B upstream	N/A	N/A

Proton Calorimetry/Experimental Runs/2022/Sep1: Difference between revisions

Latest revision as of 17:20, 8 September 2022

Contents

Experiment Equipment

Schematic

Experiment Plan

Experiment Notes

IBA Giraffe Range Pull Back Measurements

Camera Light Quenching Measurements

DDC232 Calibration and Bragg Peak Measurements

Navigation menu

@@ Line 1: / Line 1: @@
-== Detector Equipment ==
-*C-section stack holder containing 25 clear scintillator sheets around 2.86 mm thick with 24 sheets of mylar foil. '''Add 25th sheet of Mylar?'''
-*C-section stack holder containing 23 white painted scintillator sheets around 2.86 mm thick.
-*Zarges case.
-*Clatterbridge stack A and B (to be assembled during beam test)
-*DDC232 rev. B x2 & Nexys Video.
-*Single Scintillator Block & camera.
 == Experiment Equipment ==
 {| class="wikitable"
@@ Line 15: / Line 7: @@
 | style="text-align: center;" | Set in control room to take output from experimental room ethernet connection. Control laptops connected via 5GHz WiFi.
 |-
-| style="text-align: center;" | Control Laptop x3
+| style="text-align: center;" | Control Laptop x31
-| style="text-align: center;" | 2 for remote control of CMOS sensor and FPGA, 1 for notes/web GUI.
+| style="text-align: center;" | 1 for remote control of Nikon camera and FPGA, 1 for notes/web GUI.
 |-
-| style="text-align: center;" | Ethernet Cable x 3
+| style="text-align: center;" | Ethernet Cable x 2
-| style="text-align: center;" | To connect DAQ laptops to network in the experimental room, network hub to network in control room.
+| style="text-align: center;" | To connect DAQ laptop to network in the experimental room, control laptop to network in control room.
 |-
-| style="text-align: center;" | Portable Enclosure
+| style="text-align: center;" | Portable Enclosures
 | style="text-align: center;" | Modified Big Zarges Waterproof Wheeled Equipment Case.
 Features mount for scintillator stack, front and back openings for beam, patch panel with ports for SHV, BNC, SMA, USB, Camera Link cables. <br/>
 Hole for sensor powering. <br/>
+Modified Small Peli Case Waterproof Wheeled Equipment Case.
+Features mount for scintillator stack, front and back openings for beam, patch panel with ports for USB and power connections.
 Mylar windows with Al support mounted to internal face: approximately light-tight.
 |-
-| style="text-align: center;" | Rev. B Scintillator stack
+| style="text-align: center;" | Clear Scintillator stack for WET measurement.
-| style="text-align: center;" | 49 (25 clear, 23 white painted and 1 black painted) X x 100 mm, Y x 100 mm and Z x (approx) 2.8 mm sheets in ascending order from the front/beam of the end of the scintillator. Sheet numbers from front to end (in beam direction gantry angle 270°): 79, 68, 73, 62, 81, 72, 64, 67, 65, 71, 78, 77, 74, 75, 85, 82, 83, 76, 70, 80, 69, 84, 63, 66, 61, 34, 43, 32, 8, 40, 37, 38, 47, 46, 33, 42, 9, 39, 44, 49, 50, 31, 1, 45, 3, 54, 5, 51, 26. Full stack thickness measurements (in mm): 138.12, 137.74, 137.74.
+| style="text-align: center;" | 25 clear X x 100 mm, Y x 100 mm and Z x (approx) 2.8 mm sheets. Containing sheets (not in order): 79, 68, 73, 62, 81, 72, 64, 67, 65, 71, 78, 77, 74, 75, 85, 82, 83, 76, 70, 80, 69, 84, 63, 66, 61. Full stack thickness measurements (in mm): 71.00, 71.00, 71.01 = 71.00.
 |-
-| style="text-align: center;" | Rev. C Scintillator stack
+| style="text-align: center;" | White Painted Scintillator stack for WET measurement.
-| style="text-align: center;" | 32 X x 105 mm, Y x 105 mm and Z x (approx) 3 mm sheets (21 3.4 mm and 11 2.0 mm) in ascending order from the front/beam of the end of the scintillator. Sheet numbers from front to end (in beam direction gantry angle 90°): 117, 113, 134, 110, 108, 128, 107, 106, 127, 105, 104, 125, 103, 102, 124, 101, 98, 123, 97, 96, 122, 94, 93, 121, 92, 90, 120, 89, 88, 119, 87, 135. Full stack thickness measurements (in mm): 95.87, 95.96, 95.97.
+| style="text-align: center;" | 23 white painted X x 100 mm, Y x 100 mm and Z x (approx) 2.8 mm sheets. Containing sheets (not in order): 34, 43, 32, 8, 40, 37, 38, 47, 46, 33, 42, 9, 39, 44, 49, 50, 31, 1, 45, 3, 54, 5, 51. Full stack thickness measurements (in mm): 65.51, 65.53, 65.45 = 65.50.
 |-
-| style="text-align: center;" | DAQ laptop x2
+| style="text-align: center;" | Clatterbridge Prototype A
-| style="text-align: center;" | Control CMOS sensor and photodiode acquisition.
+| style="text-align: center;" | 14 clear X x 100 mm, Y x 100 mm and Z x (approx) 2.8 mm sheets. Containing sheets (ascending photodiode order, board upside down): 81, 83, 65, 74, 69, 78, 61, 77, 63, 71, 70, 73, 64, 85. Full stack thickness measurements (in mm): 39.89.
 |-
-| style="text-align: center;" | ISDI CMOS sensor
+| style="text-align: center;" | Clatterbridge Prototype B
-| style="text-align: center;" | sensor pixel dimension: 1030 x 1536. NO optical grease between scintillator and sensor. Connected to DAQ PC via Camera Link cable.
+| style="text-align: center;" | 11 clear and 3 white X x 100 mm, Y x 100 mm and Z x (approx) 2.8 mm sheets. Containing sheets (ascending photodiode order, board upside down): 52, 79, 68, 66, 75, 82, 84, 62, 80, 72, 67, 76, 51, 54. Full stack thickness measurements (in mm): 39.92.
+|-
+| style="text-align: center;" | Rev. D Scintillator stack
+| style="text-align: center;" | 32 X x 105 mm, Y x 105 mm and Z x (approx) 3 mm sheets. Containing sheets (ascending photodiode order, board upside down): 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168. Full stack thickness measurements (in mm): 95.84, 95.72, 95.78 = 95.78.
+|-
+| style="text-align: center;" | Large Single Scintillator Block
+| style="text-align: center;" | X x 100 mm, Y x 100 mm and Z x 178.57 mm.
+|-
+| style="text-align: center;" | DAQ laptop x1
+| style="text-align: center;" | Control Nikon camera and photodiode acquisition.
+|-
+| style="text-align: center;" | Nikon D7500
+| style="text-align: center;" | Connected to DAQ Laptop via USB cable.
 |-
 | style="text-align: center;" | Nexys Video FPGA development board.
 | style="text-align: center;" | For interfacing between DDC232 and PC.
 |-
-| style="text-align: center;" | Rev. B Texas Instruments DDC232 custom circuit board (x3)
+| style="text-align: center;" | Rev. B Texas Instruments DDC232 custom circuit board (x2)
 | style="text-align: center;" | Each housing 16x Hamamatsu S12915-16R photodiodes, coupled directly to scintillator sheets. Aligned by eye to scintillator sheets.
 |-
-| style="text-align: center;" | Rev. C Texas Instruments DDC232 custom circuit board (x1)
+| style="text-align: center;" | Rev. D Texas Instruments DDC232 custom circuit board (x1)
 | style="text-align: center;" | Housing 32x Hamamatsu S12915-16R photodiodes, coupled directly to scintillator sheets. Aligned by eye to scintillator sheets.
 |-
@@ Line 101: / Line 107: @@
 == Experiment Notes ==
-=== Range Pull Back Measurements ===
+Range calorimeter measurements with photodiodes, camera and IBA Giraffe.
-Range calorimeter measurements with CMOS sensor + photodiodes.
 Images from Camera: '''[http://www.hep.ucl.ac.uk/pbt/wikiData/images/UCLH_Sep2022/Nikon /unix/www/html/pbt/wikiData/images/UCLH_Sep2022/Nikon]'''
 Photodiode hexadecimal data: '''/unix/pbt/data/uclh/20220901/DDC232'''
+Giraffe data: '''/unix/pbt/data/uclh/20220901/Giraffe'''
+=== IBA Giraffe Range Pull Back Measurements ===
 {| class="wikitable"
@@ Line 118: / Line 126: @@
 !Comments
 |-
-|0 || Clear stack + white stack || 210 || 40 || N/A || 139.1 || Nominal: 25.96 cm
+|0 || Clear stack + white stack || 210 || 40 || N/A || 139.1 || Nominal: 282.1 mm
+|-
+|1 || Clear stack || 210 || 40 || N/A || 206.6 ||  Nominal: 282.1 mm
+|-
+|2 || White stack  || 210 || 40 || N/A || 212.3 || Nominal: 282.1 mm
+|-
+|3 || Empty Case || 210 || 40 || N/A || 280.0  || Nominal: 282.1 mm
+|-
+|4 || Single block || 210 || 40 || N/A || 94.2 || Curve looks really bad!!
+|-
+|5 || REVD  || 210 || 40 || N/A || 182.0 ||
+|-
+|6 || Clatterb. A || 210 || N/A || N/A || 238.4 ||
+|-
+|7 || Air - no box|| 210 || N/A || N/A || 280.0 || Here we see that the windows have no effect as this results is equal to run 3
+|-
+|8 || Clatterb. B|| 210|| 40|| N/A || 238.9 ||
+|}
+=== Camera Light Quenching Measurements ===
+'''NOTE: alignment plates left on Zarges case during measurement'''
+{| class="wikitable"
+!Run number
+!Image number
+!Beam Energy (MeV)
+!Estimated Range (mm)
+!Current (nA)
+!Spot size (mm, FWHM)
+!Exposure (s)
+!Aperture
+!ISO
+!Degrader WET (mm)
+!Comments
+!Image
+!Fit
+|-
+| 0 || IMG0047 || Background || ||  || || 5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC]</div> || Background, exposure 5s
+|-
+|-
+| 1 || IMG0048 || 245 MeV || 366.3 || 10 || || 1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> || exposure 1s
+|-
+|-
+| 2 || IMG0049 || 245|| 366.3  || 10 || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
+|-
+|-
+| 3 || IMG0050 ||  245 ||  || 10 || || 0.25  || f/5.6|| ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
+|-
+|-
+| 4 || IMG0051 || 245 ||  || 10  || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
+|-
+| 5 || IMG0052 || 70 MeV ||  || 700 || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
+|-
+|-
+| 6 || IMG0053 || 70||  ||  || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|1 || Clear stack || 210 || 40 || N/A || 206.6 ||  Nominal: 25.96 cm
 |-
-|2 || White stack  || 210 || 40 || N/A || 212.3 || Nominal: 25.96 cm
+| 7 || IMG0054 ||  70 ||  ||  ||  || 0.1 || f/5.6|| ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|3 || Empty Case || 210 || 40 || N/A ||  ||
 |-
-|4 || REVD || N/A || N/A || N/A || ||
+| 8 || IMG0055 || 70 ||  ||  || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|5 || Single block || N/A || N/A || N/A ||  ||
+| 9 || IMG0056 || 75 MeV ||  || 700 nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|6 || Clatterb. A || N/A || N/A || N/A ||  ||
 |-
-|7 || Clatterb. B || N/A || N/A || N/A ||  ||
+| 10 || IMG0057 || 75||  ||  || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|8 || Clatterb. A+B|| N/A || 10|| N/A || ||
 |-
-|9 || 240 || N/A || 10 || N/A || 12.5 ||
+| 11 || IMG0058 ||  75  ||  ||  ||  || 0.1 || f/5.6|| ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|10 || 240 || N/A || 10 || N/A || 12.5 ||
 |-
-|11 || 200 || N/A || 90 || N/A || 12.5 ||
+| 12 || IMG0059 || 75  ||  ||  || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|12 || 200 || N/A || 20 || N/A || 12.5 ||
+| 13 || IMG0060 || 80 MeV ||  || 500 nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|13 || 130 || N/A || 50 || N/A || 12.5 ||
+| 14 || IMG0061 || 80  ||  || 500 nA || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|14 || 120 || N/A || 60 || N/A || 12.5 ||
+| 15 || IMG0062 || 80  ||  || 500 nA || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|15 || 120 || N/A || 270 || N/A || 12.5 ||
+| 16 || IMG0063 || 80 ||  || 500 nA || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|16 || 110 || N/A || 70 || N/A || 12.5 ||
+| 17 || IMG0064 || 130 MeV ||  || 200 nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|17 || 110 || N/A || 300 || N/A || 12.5 ||
+| 18 || IMG0065 || 130 ||  || 200 nA || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|18 || 100 || N/A || 90 || N/A || 12.5 ||
+| 19 || IMG0066 || 130  ||  || 200 nA || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|19 || 100 || N/A || 350 || N/A || 12.5 ||
+| 20 || IMG0067 || 130 ||  || 200 nA || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|20 || 90 || N/A || 110 || N/A || 12.5 ||
+| 21 || IMG0068 ||  140 MeV ||  || 165  nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|21 || 90 || N/A || 400 || N/A || 12.5 ||
+| 22 || IMG0069 ||  140  ||  ||  nA || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|22 || 80 || N/A || 500 || N/A || 12.5 ||
+| 23 || IMG0070 ||  140  ||  ||  nA || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|23 || 70 || N/A || 700 || N/A || 12.5 ||
+| 24 || IMG0071 ||  140  ||  ||  nA || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|24 || 130 || N/A || 200 || N/A || 12.5 ||
+|25 || IMG0072 ||   150 MeV ||  ||  125  nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|25 || 200 || N/A || 20 || N/A || 12.5 || 170 || 50 || LH shoot through; 270° gantry; CMOS sensor fine; || N/A || N/A
+| 26 || IMG0073 ||  150 ||  ||  nA || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|26 || 130 || N/A || 200 || N/A || 12.5 || 170 || 0 || 270° gantry; CMOS sensor saturated; || N/A || N/A
+| 27 || IMG0074 ||  150 ||  ||  nA || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|27 || 120 || N/A || 270 || N/A || 12.5 || 170 || 0 || 270° gantry; CMOS sensor saturated; || N/A || N/A
+| 28 || IMG0075 ||  150 ||  ||  nA || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|28 || 110 || N/A || 300 || N/A || 12.5 || 170 || 0 || 270° gantry; CMOS sensor saturated; || N/A || N/A
+|29 || IMG0076 ||   160 MeV ||  ||  125  nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|29 || 100 || N/A || 350 || N/A || 12.5 || 170 || 0 || 270° gantry; CMOS sensor saturated; || N/A || N/A
+| 30 || IMG0077 ||  160 ||  ||  nA || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|30 || 90 || N/A || 400 || N/A || 12.5 || 170 || 0 || 270° gantry; CMOS sensor saturated; || N/A || N/A
+| 31 || IMG0078 ||  160 ||  ||  nA || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|31 || 80 || N/A || 500 || N/A || 12.5 || 170 || 0 || 270° gantry; CMOS sensor saturated; || N/A || N/A
+| 32 || IMG0079 ||  160 ||  ||  nA || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|32 || 70 || N/A || 700 || N/A || 12.5 || 170 || 0 || 270° gantry; CMOS sensor saturated; || N/A || N/A
+|33 || IMG0080 ||   170 MeV ||  ||  130  nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|33 || background || N/A || N/A || N/A || 12.5 || 170 || 0 || RevC onwards; 270° gantry || N/A || N/A
+| 34 || IMG0081 ||  170 ||  ||  nA || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|34 || 240 || N/A || 13 || N/A || 12.5 || 170 || 50 || LH shoot through; 270° gantry || N/A || N/A
+| 35 || IMG0082 ||  170 ||  ||  nA || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|35 || 240 || N/A || 13 || N/A || 12.5 || 170 || 50 || RH shoot through; 90° gantry || N/A || N/A
+| 36 || IMG0083 ||  170 ||  ||  nA || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|36 || 110 || N/A || 300 || N/A || 12.5 || 170 || 0 || 90° gantry; || N/A || N/A
+|37 || IMG0084 ||   120 MeV ||  ||  270  nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|37 || 105 || N/A || 350 || N/A || 12.5 || 170 || 0 || 90° gantry; || N/A || N/A
+| 38 || IMG0085 ||  120 ||  ||  nA || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|38 || 100 || N/A || 350 || N/A || 12.5 || 170 || 0 || 90° gantry; || N/A || N/A
+| 39 || IMG0086 ||  120 ||  ||  nA || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|39 || 95 || N/A || 400 || N/A || 12.5 || 170 || 0 || 90° gantry; || N/A || N/A
+| 40 || IMG0087 ||  120 ||  ||  nA || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|40 || 90 || N/A || 400 || N/A || 12.5 || 170 || 0 || 90° gantry; || N/A || N/A
+|41 || IMG0088 ||   110 MeV ||  ||  300  nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|41 || 85 || N/A || 500 || N/A || 12.5 || 170 || 0 || 90° gantry; || N/A || N/A
+| 42 || IMG0089 ||  110 ||  ||  nA || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|42 || 80 || N/A || 500 || N/A || 12.5 || 170 || 0 || 90° gantry; || N/A || N/A
+| 43 || IMG0090 ||  110 ||  ||  nA || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|43 || 75 || N/A || 700 || N/A || 12.5 || 170 || 0 || 90° gantry; || N/A || N/A
+| 44 || IMG0091 ||  110 ||  ||  nA || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-|44 || 70 || N/A || 700 || N/A || 12.5 || 170 || 0 || 90° gantry; || N/A || N/A
+|45 || IMG0092 ||   100 MeV ||  ||  350  nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
-|}
+|-
+| 46 || IMG0093 ||  100 ||  ||  nA || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
-=== Light Quenching Measurements ===
+|-
+| 47 || IMG0094 ||  100 ||  ||  nA || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
-{| class="wikitable"
+|-
-!Run number
+| 48 || IMG0095 ||  100 ||  ||  nA || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
-!Image number
+|-
-!Beam Energy (MeV)
+|49 || IMG0096 ||   90 MeV ||  ||   400 nA || || 0.5 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
-!Estimated Range (mm)
-!Current (nA)
-!Spot size (mm, FWHM)
-!Shutter Speed (s)
-!Aperture
-!ISO
-!Degrader WET (mm)
-!Comments
-!Image
-!Fit
 |-
-| 0 || DSC_1628 || 160 || || 125 || || 1 || f3 || ISO100 || 0 || || <div class="image150px" style="text-align: center;"> [PIC]</div> ||
+| 50 || IMG0097 ||  90 ||  ||  nA || || 0.25 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
+| 51 || IMG0098 ||  90 ||  ||  nA || || 0.1 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
-| 1 || DSC_1628 || 160 || || 125 || || 1 || f3 || ISO100 || 0 || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
+| 52 || IMG0099 ||  90 ||  ||  nA || || 0.05 || f/5.6 || ISO100 ||  || || <div class="image150px" style="text-align: center;"> [PIC2]</div> ||
 |-
 |}
-=== Calibration and Bragg Peak Measurements ===
+=== DDC232 Calibration and Bragg Peak Measurements ===
 {| class="wikitable"
@@ Line 250: / Line 302: @@
 !Replay Fit
 |-
-|0 || A || Background || N/A || N/A || N/A || 350 || 170 || 0 || room light off || N/A || N/A
+|0 || Clatter. A || Background || || - || N/A ||  12.5 (constant) || 170 ||  ||   || N/A ||
-|-
-|1 || A || Background || N/A || N/A || N/A || 300 || 170 || 0 || room light off || N/A || N/A
-|-
-|2 || A || Background || N/A || N/A || N/A || 250 || 170 || 0 || room light off || N/A || N/A
 |-
-|3 || A || Background || N/A || N/A || N/A || 200 || 170 || 0 || room light off || N/A || N/A
+|1 || Clatter. A || 245 MeV || || 10 nA  || N/A || 12.5 || 170 ||  || Gantry angle 270, shoot through || N/A ||
 |-
-|4 || A || Background || N/A || N/A || N/A || 150 || 170 || 0 || room light off || N/A || N/A
+|2 || Clatter. B || Background || N/A || N/A || N/A || 12.5 || 170 || ||  || N/A || N/A
 |-
-|5 || A || Background || N/A || N/A || N/A || 100 || 170 || 0 || room light off || N/A || N/A
+|3 || Clatter. B ||  245 MeV|| 10 nA || N/A || 12.5 || 170 || ||  || Gantry angle 270, shoot through  || N/A ||
 |-
-|6 || A || Background || N/A || N/A || N/A || 50 || 170 || 0 || room light off || N/A || N/A
+|4 || Clatter. B|| 245 MeV|| 10 nA || N/A || N/A || 12.5 || 170 ||  || Gantry angle 90, shoot through || N/A. After this Clatter. B was destroyed ||
 |-
-|7 || A || Background || N/A || N/A || N/A || 12.5 || 170 || 0 || room light off (continued)|| N/A || N/A
+|5 || Clatter. A|| 245 MeV|| 10 nA || N/A || N/A || 12.5 || 170 ||  || Gantry angle 90, shoot through || N/A ||
 |-
-|8 || A || 240 || N/A || 10|| N/A || 350 || 170 || 50 || LH shoot through; 270° gantry; CMOS sensor saturated|| N/A || N/A
+|6 || Clatter. A || 70 MeV || 700 nA || N/A || N/A || 12.5 || 170 || 0 || Gantry angle 90 || N/A || N/A
 |-
-|9 || A || 240 || N/A || 10 || N/A || 12.5 || 170 || 50 || LH shoot through; 270° gantry; CMOS sensor saturated || N/A || N/A
+|7 || REVD prototype || Background|| N/A || N/A || N/A || 12.5 || 170 || 0 || - || N/A || N/A
 |-
-|10 || A || 240 || N/A || 10 || N/A || 12.5 || 170 || 50 || RH shoot through; 90° gantry; CMOS sensor saturated || N/A || N/A
+|8 || REVD prototype || 245 MeV || 10 nA || N/A || N/A || 12.5 || 170 || 0 || Gantry angle 90, shoot through. Clatterbridge A upstream and Clatt. B downstream|| N/A || N/A
 |-
-|11 || A || 200 || N/A || 90 || N/A || 12.5 || 170 || 50 || RH shoot through; 90° gantry; CMOS sensor saturated; || N/A || N/A
+|9 || REVD prototype || 130 MeV || 200 nA || N/A || N/A || 12.5 || 170 || 0 || Gantry angle 90. Clatterbridge A upstream and Clatt. B downstream|| N/A || N/A
 |-
-|12 || A || 200 || N/A || 20 || N/A || 12.5 || 170 || 50 || RH shoot through; 90° gantry; CMOS sensor fine; || N/A || N/A
+|10 || REVD prototype || 245 MeV || 10 nA || N/A || N/A || 12.5 || 170 || 0 || Gantry angle 270, shoot through. Clatterbridge A downstream and Clatt. B upstream|| N/A || N/A
 |-

Proton Calorimetry/Experimental Runs/2022/Sep1: Difference between revisions

Latest revision as of 17:20, 8 September 2022

Experiment Equipment

Schematic

Experiment Plan

Experiment Notes

IBA Giraffe Range Pull Back Measurements

Camera Light Quenching Measurements

DDC232 Calibration and Bragg Peak Measurements

Navigation menu

Search