View source for Proton Calorimetry/Equipment/Inventory Location

List of tools and equipment stored in D106 updated on Dec 2020.


== WOODEN BOOKSHELF ==

*	2 PELI cases 
**	1 PELI CASE contains HV+Digitiser
**	1 PELI CASE contains the Thunderbolt Expansion Chassis with Display Port (CMOS sensor graphic card)
*	Adam Gibson Nikon camera tools (in the orange plastic bag)
*	Mylar Windows for Experimental Runs
*	Travel Router
*	Features mount for scintillator and PMT
*	USB to USB cables
*	Ethernet cabler: different length
*	Empty Thunderbolt Expansion Chassis with Display Port box (only power cables inside)
*	1 USB to USBC cable
*	1 USB to microUSB cable
*	3 microUSB to USBc cables (different lengths)

STANLEY BIG CASE:
-	1 Power strip: USB and Universal sockets
-	Mains power cables
-	Wifi router LINKSYS AC1900
-	USB to USB long cables
-	4 grommet kits 
-	Long SHV cables for HV power supply
-	Desktop switch
-	WARCO Vice 

PELI Case trolley n.1:
-	Caen NDT1470 HV Supply
-	Caen NDT1470 HV Supply power adaptor + mains cable
-	SHV cables for HV power supply
-	
-	Caen DT5751 Digitiser 
-	Caen DT5751 Digitiser power cable
-	USB Cable to connect the digitiser to the laptop
-	SMA to SMA short cable


PELI Case trolley n.2:
-	Neutral filter (fragile)
-	Thunderbolt Expansion Chassis with Display Port (CMOS sensor graphic card)
-	Mains power cable + graphic card power supply
-	USBc to USBc cable to connect the graphic card enclosure to a laptop
-	Travel network switch
-	Network switch power cable: USB to barrel power connector 
-	Short ethernet cable

From Bottom to Top
1 Bottom Case
-	Caliper
-	USB to USB cables
-	USB to jack type M Barrel 5V DC power supply (spare cable for the network switch)
-	D-Link Network switch empty box (the switch is in Peli Case 2)

.     
 

2.
- PMT
- Silicone Optical grease
- Scintillator cleaning wipes and liquid cleaner (isopropane?)
- black tape

     
 

3.
-SMA to SMA long and short robust cables
-BNC to BNC cable
-BNC to MCX cables for the CAEN digitiser
    
 
	

4.
Wera Tools: screwdrivers set , blade and L keys
 

5.
Scintillators
-	different sizes. Additional scintillator sheets are on my desk
 

 


6
-	BNC, SMA, and  SHV patch panel 
-	1 Power strip: USB and Universal sockets
-	Mains power cable
-	Ethernet cables
-	1 box containing: DC-4200 MHz Signal Splitter, SMA connectors, BNC to SMA connectors and SMA to MCX adaptor. Spanner for SMA connectors.
 
   
 

7
-ISDI CMOS sensor
- sensor enclosure screws and washers
- Camera Link Cable

 


 

8 Top container
-	BNC, SMA, and MCX  connectors
-	USB sockets for the parch panel
-	Tape Measure 
-	Photodiodes and LEDs
-